Nickel Alloys - Strip and Ribbon in Coil

 

Gauge Range

0.0127 to 3.500 mm

  

Width

0.5 to 1368 mm

  

Edges

 • Slit  

 • Round  

 •  Square  

 •  Deburred

Packaging

 •  Ribbon Wound Coils  

 • Oscillate Wound Coils & Spools

 • Cut-To-Length

Minimum Quantities

Small Quanities availabe dependant on width and gauge combination

 

Please see a selection of alloys we are able to quote you on. If you can see what you are looking for please contact us

 

 

Description

HASTELLOY C-22

A versatile nickel chromium molybdenum tungsten alloy with resistance to a variety of industrial chemicals. Superior weldability.

HASTELLOY G-30  

High chromium nickel base alloy with superior corrosion resistance to phosphoric acids and environments with highly oxidizing acids.

HASTELLOY® B-3 

Used in chemical industry for resistance to hydrochloric acid, sulfuric acid, phosphoric acid. Oxidation atmosphere resistant to 1400°F.

HASTELLOY® C-276 

Used in chemical industry for resistance to oxidizing agents. Replaces Hastelloy. C™ with better fabricability.

HASTELLOY® X  

Jet engine components for afterburner sections, blades, tailpipes, furnace applications, honey-comb, bellows, ducting. Good strength and oxidation resistance to 2200°F.

HAYNES® 214     

Nickel based precipitation strengthened alloy with oxidation resistance to 2200°F. For furnace parts exposed to carburizing, chlorine contaminated and oxidizing atmospheres; gas turbine parts.

HAYNES® 230    

Nickel-chromium-tungsten-molybdenum alloy with outstanding resistance to oxidizing environments up to 2100°F for prolonged periods.

HAYNES® 242    

Age hardenable, nickel alloy for use up to 1300°F. Low thermal expansion, good oxidation resistance and excellent aged ductility. Suited for gas turbine engines and chemical process plants.

INCOLOY® 800    

Nickel-iron-chromium alloy that is carburization resistant at elevated temp.

INCOLOY® 825  

An alloy that is highly resistant to ggressively corrosive environments such as sulfuric, phosphoric acids and seawater.

INCONEL® 600     

Has high corrosion and heat resistance combined with excellent strength and workability. Mainly used in corrosive atmospheres. Oxidation resistance to 2150°F.

INCONEL® 625    

Outstanding corrosion resistance with excellent fabricability. Good for cryogenic to high temp. applications up to 2000°F.

INCONEL® 718  

High strength and corrosion resistance for use in temp. ranges from -423°F to 1300°F. Nuclear applications.

INCONEL® X-750    

A precipitation hardening nickel-chromium alloy with useful strength to 1500°F. Good corrosion and oxidation resistance.

MONEL® 400    

A solid solution alloy with high strength and toughness over wide temp. ranges. Used in electronic components, springs.Corrosion resistant and oxidation resistance to 1000°F.

MONEL® K-500

Similar to Monel. 400™ but with higher tensile strength; a precipitation hardening alloy. Used in oil well drilling collars, doctor blades. Good strength and ductility 423°F to 1200°F.

Ni-SpanC® 902

A nickel-iron-chromium alloy used in precision spring applications subject to severe temp. fluctuations.

NICKEL 200

Commercially pure nickel. High corrosion resistance. Used in food handling and electronics.

NICKEL 201

Similar to Nickel 200 except with a lower carbon content for better formability. Most applications in chemicals.

PERMANICKEL 300 

Age - hardenable, high nickel alloy, with very good thermal electrical conductivity.

 

Trademark Notice - Some names are trade names and/or trademarks of specific manufacturers. Hollinbrow are not affiliated with any manufacturer(s). Hollinbrow can, in many cases, offer equivalent or similar alloys produced by alternate sources. Names are listed solely for reference to help identify products consistent with listed specifications.